Subdivision Regulations

Subdivision Regulations • Infrastructure Requirements • 10 Franklin Subdivision Regulations • December 12, 2019 3.12 Maintenance and Supervision Where the subdivision contains sewers, water supply systems, or other facilities necessary or desirable for the welfare of the area, or that are of common use or benefit but cannot satisfactorily be maintained by an existing public agency, provisions shall be made which are acceptable to the agency having jurisdiction over the location and maintenance of such facilities for the proper and continuous operation, maintenance, and supervision of such facilities. 3.13 Monuments and Pins A. For arterial and collector streets, concrete monuments four inches in diameter or square and three feet long with a flat top shall be set at all right-of-way corners, at all points, where the right-of-way lines intersect the exterior boundaries of the subdivision and at angle points and points of curve in each right-of-way. The top of the monument shall have an indented cross to properly identify the location and shall be set flush with the finished grade. B. All other lot corners shall be marked with iron pins not less than three-fourths inch in diameter and 24 inches long and driven so as to be flush with the finished grade.